Dodge C1210: G Sensor Input Circuit Performance
Is your scanner showing Dodge C1210?
No worries. We'll show you what it means and how to deal with it.
Dodge C1210: G Sensor Input Circuit Performance
OVERVIEWWhat Does The Dodge C1210 Code Mean?
Continuously, with ignition on, until vehicle speed exceeds 20 km/h (12.4 m. p. h. ) for the first time, but not if the sensor voltage is out of range. Or, during diagnostic mode. Or, if the monitoring was inhibited by a corresponding diagnostics command. If the measured acceleration signal is higher than 0.8 g for longer than the specified detection time
What Are The Potential Causes Of The Dodge C1210 Code?
- DYNAMICS SENSOR INSTALLATION
- DYNAMICS SENSOR
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> INNOVA 5210
>>> Dynamics Sensor - Mopar (56029469AA)
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Dodge C1210, DTCDECODE.
