Chevrolet P1214: Injection Pump Timing Offset
Is your scanner showing Chevrolet P1214?
No worries. We'll show you what it means and how to deal with it.
Chevrolet P1214: Injection Pump Timing Offset
OVERVIEWWhat Does The Chevrolet P1214 Code Mean?
Key on or engine running; and the PCM detected the Timing Offset was more than 2.46 degrees or less than -2.46 degrees. Note: This code may set due to an intermittent fault.
What Are The Potential Causes Of The Chevrolet P1214 Code?
- The PCM will only run the test if the TDC offset adjustment time set procedure has been activated. The vehicle will most likely not be brought in with this code in memory.
- CKP sensor incorrectly installed or mounting tab is broken
- Fuel injection pump is bad
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> ACDelco GM Original Equipment 213-354 Engine Crankshaft Position Sensor
>>> Electric Fuel Pump, Replacement for Chevrolet Chevy
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
- GM, 2013, Service Bullettin – Prior To Any Circuit Testing.
- GM, 2014, Service Bullettin – Special Coverage Adjustment – Electronic Diesel-Fuel Injection Pump Failure – Repair/Replace.
- GM, 2014, Service Bullettin – 00064H — Special Policy Adjustment — Electronic Diesel-Fuel Injection Pump Failure — Repair/Replace.
