Acura P1337: Crankshaft Position Sensor 'B' Circuit No Signal
Is your scanner showing Acura P1337?
No worries. We'll show you what it means and how to deal with it.
Acura P1337: Crankshaft Position Sensor 'B' Circuit No Signal
OVERVIEWWhat Does The Acura P1337 Code Mean?
Engine cranking or running; and the PCM did not detect any signals from the Crankshaft Position (CKP) ‘B’ sensor during the CCM test.
What Are The Potential Causes Of The Acura P1337 Code?
- CKP Sensor ‘B’ signal circuit is open or shorted to ground
- CKP Sensor ‘B’ signal circuit is shorted to VREF or power
- CKP Sensor ‘B’ is damaged or has failed
- CKP Sensor ‘B’ pickup assembly or its pulse rotor is damaged
- PCM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Holstein Parts 2CRK0261 Crankshaft Position Sensor
>>> Acura Engine Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Acura P1337, DTCDECODE.
