Audi P1356: Cylinder 1 Ignition Circuit Short to B+
Is your scanner showing Audi P1356?
No worries. We'll show you what it means and how to deal with it.
Audi P1356: Cylinder 1 Ignition Circuit Short to B+
OVERVIEWWhat Does The Audi P1356 Code Mean?
This code is set in this condition:
Key on or Engine started, battery voltage at least 11.5v, all electrical components off, ground connections between engine and chassis well connected, and the ECM detected the voltage of the ignition was outside the designed parameters.
What Are The Potential Causes Of The Audi P1356 Code?
Below are some potential causes of this DTC:
- Fuel pump relay faulty
- Camshaft position sensor has failed
- Engine speed sensor has failed
- Circuit wires have shorted to ground or are open
- Ignition coils with power output stages are faulty
- ECM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
>>> URO Parts 191906383C Fuel Pump Relay
>>> ZBN CAM Camshaft Position Sensor 07K907601A
>>> ZBN Crank Crankshaft Position Sensor 0261210147 06A906433C
>>> Audi Engine Control Module
>>> A-Premium Ignition Coil Pack Set of 4 Compatible with Audi A3 2004-2013 A4 2005-2016
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Audi P1356, DTCDECODE.