Acura B1180: Gauge Control Module Lost Communication with MICU (AUTOLT Message)
Is your scanner showing Acura B1180?
No worries. We'll show you what it means and how to deal with it.
Acura B1180: Gauge Control Module Lost Communication with MICU (AUTOLT Message)
OVERVIEWWhat Does The Acura B1180 Code Mean?
Poor communication between the Gauge Control Module and the MICU. If DTCs B1055, B1056, B1057, B1255, B1955, B2155, B2156, and/or B2161 are indicated, perform the MICU input test. If no additional codes are present. perform the Gauge Control Module input test.
What Are The Potential Causes Of The Acura B1180 Code?
- Loose or poor connections between the Gauge Control Module and the MICU
- Blown fuse in the main under-hood fuse box
- Blown fuse in the under-dash fuse/relay box
- “Open” or “Short” to ground at the Gauge Control Module
- “Open” or “Short” to ground at the MICU
- Faulty Gauge Control Module
- Faulty MICU
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Acura Under-dash Fuse/Relay Box
>>> Acura Gauge Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Accessories & Equipment Multiplex Integrated Control System Service Manual for B1180 – 2004 Acura TSX, page 44.
