Subaru P1595: Automatic Transaxle Diagnosis Input Signal Circuit Low Input
Is your scanner showing Subaru P1595?
No worries. We'll show you what it means and how to deal with it.
Subaru P1595: Automatic Transaxle Diagnosis Input Signal Circuit Low Input
OVERVIEWWhat Does The Subaru P1595 Code Mean?
Key on, and the PCM detected an unexpected “low” voltage condition on the A/T Diagnosis Signal circuit (5-volt) in the CCM test.
What Are The Potential Causes Of The Subaru P1595 Code?
- Check harness between ECM and TCM connector
- Check output signal for ECM
- Check any other DTC on display
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
>>> Automatic Transmission Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
2001 FORESTER SERVICE MANUAL FOR P1595 – Pages 335-336.
