Subaru P1514: ISC Solenoid Valve Signal No. 3 Circuit Malfunction (low input)
Is your scanner showing Subaru P1514?
No worries. We'll show you what it means and how to deal with it.
Subaru P1514: ISC Solenoid Valve Signal No. 3 Circuit Malfunction (low input)
OVERVIEWWhat Does The Subaru P1514 Code Mean?
Key on or engine running; and the PCM detected an unexpected “low” condition on the IAC solenoid Signal 3 circuit during the test.
What Are The Potential Causes Of The Subaru P1514 Code?
- Check power supply to idle air control solenoid valve
- Check harness between ECM and idle control solenoid valve connector
- Check poor contact
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
>>> Subaru 22650AA182 Idle Air Control Valve
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE FOR P1514 – Page 163.
