Jeep B1CDB: Passenger Occupant Detector Circuit Low
Is your scanner showing Jeep B1CDB?
No worries. We'll show you what it means and how to deal with it.
Jeep B1CDB: Passenger Occupant Detector Circuit Low
OVERVIEWWhat Does The Jeep B1CDB Code Mean?
The ORC receives, processes, and continuously monitors (monitor rate of 500 ms) the analog signal from the ODS. This code will set, if the ORC detects short to ground on the (R283) Passenger Occupant Detector Sensor Signal circuit for 2.5 – 5 seconds. The DTC will not latch for the entire ignition cycle. The code goes from Active to Stored 2.5 – 5 seconds after the code setting criteria is gone.
What Are The Potential Causes Of The Jeep B1CDB Code?
- (R283) passenger occupant detector signal circuit open
- (R283) passenger seat occupant detector signal circuit shorted to ground
- (R284) passenger occupant detector return circuit open
- (R283) passenger seat occupant detector signal circuit shorted to the (R284) passenger seat occupant detector return circuit
- Passenger seat occupant detection sensor
- Occupant restraint controller (ORC)
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Jeep B1CDB, DTCDECODE.
