Ford P1009: EVAP System Self Test Not Able To Complete

Is your scanner showing Ford P1009?
No worries. We'll show you what it means and how to deal with it.

Presented by
Randy Worner

Ford P1009: EVAP System Self Test Not Able To Complete

OVERVIEW
Severity
:
Medium
DIY Difficulty Level
:
Intermediate
Repair Cost
:
$200-$560
Can I Still Drive?
:
Yes (Short-term only)

What Does The Ford P1009 Code Mean?

This DTC sets when the EVAP system monitor is unable to complete due to EVAP system or component concerns.

What Are The Potential Causes Of The Ford P1009 Code?

  • Excessive fuel tank vapor pressure
  • Excessive fuel tank vacuum
  • Vehicle is in RUN mode
  • Vehicle refueled during EVAP system monitor

How Can You Fix The Ford P1009 Code?

This DTC may be accompanied by other DTCs. Carry out the key ON, engine OFF (KOEO) self-test. Diagnose the other DTCs first. If no other DTCs are present, inspect the EVAP system for causes of excessive fuel vapor pressure or vacuum. Check the EVAP system for any visual signs of damage. If no concerns are present, clear the DTC and repeat the self-test.

Recommended Parts

Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:

>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Ford Fuel Tank Pressure Sensor

Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!

Reference Sources

Ford P1009, DTCDECODE.

Tagged :
You know someone would like this

Leave a comment

Your email address will not be published. Required fields are marked *