Dodge P1295: 5-Volt VREF Missing To Position Sensor
Is your scanner showing Dodge P1295?
No worries. We'll show you what it means and how to deal with it.
Dodge P1295: 5-Volt VREF Missing To Position Sensor
OVERVIEWWhat Does The Dodge P1295 Code Mean?
Engine started, vehicle driven to over 20 mph at more than 1500 rpm with MAP Sensor less than 13 kPa, and the PCM detected the TP Sensor signal was less than a specified value during the test.
What Are The Potential Causes Of The Dodge P1295 Code?
- TP Sensor VREF circuit is open between the Sensor and PCM
- TP Sensor ground circuit is open between the Sensor and PCM
- TP Sensor is damaged or has failed
- PCM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> TPS APPS Throttle Position Sensor Replacement for 1998.5-2007
>>> Engine Controller Module - Mopar (68243309AB)
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Dodge P1295, DTCDECODE.
