Dodge C2128: ECU Reset/Recovery Occured
Is your scanner showing Dodge C2128?
No worries. We'll show you what it means and how to deal with it.
Dodge C2128: ECU Reset/Recovery Occured
OVERVIEWWhat Does The Dodge C2128 Code Mean?
Once at each ignition cycle. When the ignition is turned on, the Electro-Hydraulic Power Steering (EHPS) Module checks to see if the last shutdown occurred correctly. If it did not, this DTC will be set active for the remainder of the current key cycle. The EHPS Pump will run normally even if this DTC is active.
What Are The Potential Causes Of The Dodge C2128 Code?
- (A11) fused b(+) circuit open or high resistance
- (z935) ground circuit open or high resistance
- Electro-hydraulic power steering (EHPS) pump
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> INNOVA 5210
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Dodge C2128, DTCDECODE.
