Dodge C1032: Rear Wheel Speed Sensor Signal Erratic Performance (Ebc125)
Is your scanner showing Dodge C1032?
No worries. We'll show you what it means and how to deal with it.
Dodge C1032: Rear Wheel Speed Sensor Signal Erratic Performance (Ebc125)
OVERVIEWWhat Does The Dodge C1032 Code Mean?
With the ignition on and no system under voltage or over voltage condition present. Each time excessive wheel speed sensor acceleration or deceleration is detected, a fault counter increments. If the fault counter exceeds a specified value, the DTC will set.
What Are The Potential Causes Of The Dodge C1032 Code?
- Intermittent rear wheel speed sensor dtc
- (b222) rear wheel speed sensor supply circuit short to ground
- (b22) rear wheel speed sensor signal circuit short to ground
- (b222) rear wheel speed sensor supply circuit open
- (b22) rear wheel speed sensor signal circuit open
- (b222) rear wheel speed sensor supply circuit shorted to voltage
- (b22) rear wheel speed sensor signal circuit shorted to voltage
- (b222) rear wheel speed sensor supply circuit shorted to the (b22) rear wheel speed sensor signal circuit
- Tone wheel
- Excessive rear wheel speed sensor air gap
- Wheel bearing
- Rear wheel speed sensor
- Anti-lock brake module
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Dorman 970-024 Rear Center ABS Wheel Speed Sensor
>>> Mopar 68228991AD ABS Module
>>> Axle ABS Tone Ring (Rubber Relutor Ring) With Magnetic Encoding 213132ABS
>>> Wheel Bearing - Mopar (5086772AA)
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Dodge C1032, DTCDECODE.
