Chrysler P1741: Gear Ratio Error In 4 Prime
Is your scanner showing Chrysler P1741?
No worries. We'll show you what it means and how to deal with it.
Chrysler P1741: Gear Ratio Error In 4 Prime
OVERVIEWWhat Does The Chrysler P1741 Code Mean?
The transmission control system uses three speed sensors, one to measure input rpm, one to measure Transfer Speed output rpm of the main transmission assembly, and a third to measure the final transmission output rpm. These inputs are essential for proper transmission operation.
Therefore, the integrity of this data is verified through system checks. When in gear, if the gear ratio does not compare to a known gear ratio, the corresponding gear ratio error trouble code is set. The transmission will go into Limp-in mode after four gear ratio error events occur in a given driving cycle.
What Are The Potential Causes Of The Chrysler P1741 Code?
- RELATED TRANSMISSION DTCS PRESENT
- INTERMITTENT GEAR RATIO ERRORS
- TRANSMISSION SOLENOID/TRS ASSEMBLY
- INTERNAL TRANSMISSION
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Keenso 5Pcs Transmission Solenoid Kit, Automatic Transmission Shift Control Solenoid Valve
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Chrysler P1741, DTCDECODE.