Chrysler B11C9: Right Temperature Door Travel Too Small
Is your scanner showing Chrysler B11C9?
No worries. We'll show you what it means and how to deal with it.
Chrysler B11C9: Right Temperature Door Travel Too Small
OVERVIEWWhat Does The Chrysler B11C9 Code Mean?
After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions.
Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present. For further information (Refer to Heating and Air Conditioning – Description).
What Are The Potential Causes Of The Chrysler B11C9 Code?
- RELATED DTCS PRESENT
- PASSENGER BLEND DOOR BINDING
- PASSENGER BLEND DOOR ACTUATOR
- A/C HEATER CONTROL
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> 604-029 HVAC Blend Door Actuator Replacement for Chrysler 200/Sebring
>>> Charger Magnum Chrysler 300 A/C Air Conditioning Heater Control Switch Mopar OEM
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Chrysler B11C9, DTCDECODE.
