Chrysler B1044: Panel Mode Door 1 Travel Range Too Small
Is your scanner showing Chrysler B1044?
No worries. We'll show you what it means and how to deal with it.
Chrysler B1044: Panel Mode Door 1 Travel Range Too Small
OVERVIEWWhat Does The Chrysler B1044 Code Mean?
The A/C Heater Control uses a pulse feedback to the controller to detect the total door movement range. If the amount of pulses required to move the door completely in both directions is less than what the controller has stored in its memory, this DTC will set.
If an Actuator Calibration Test is performed and the A/C Heater Control detects a valid range of the door movement span in both directions, the DTC will change from Active to Stored and will stay in the controllers memory for 100 ignition cycles.
What Are The Potential Causes Of The Chrysler B1044 Code?
- Related DTCS Present
- Mode Door Binding
- Mode Door Actuator
- A/C Heater Control
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Dorman 604-029 HVAC Blend Door Actuator
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Chrysler B1044, DTCDECODE.
