Chevrolet U1041: No Communication With Electronic Brake Control Module

What Does The Chevrolet U1041 Code Mean?

Key on, and a message from a learned ID number was not detected for the five seconds. Modules on the Class 2 circuit monitor for data communications during vehicle operation. When a module receives a message for critical data, the module records the identification number of the module which sent the message for the state of health monitoring/node alive messages. A critical operating parameter is one which, when not received, requires that the module use a default value for that parameter. Once an identification number is learned by a module, it will monitor for that module node alive message. Each module on the class 2 serial data circuit is required to send a Node Alive message every 2 seconds. When no message is detected from a learned identification number for 5 seconds, a Diagnostic Trouble Code (DTC) U1041 is set.

What Are The Potential Causes Of The Chevrolet U1041 Code?

• EBCM Class 2 circuit is open, shorted to ground or to B+
• EBCM ignition power circuit(s) has a high resistance condition
• EBCM main ground circuit(s) has a high resistance condition
• EBCM (module) may have failed and is pulling the circuit low

Recommended Parts

Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:

>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Dorman 599-705 Remanufactured ABS Control Module for Select Chevrolet/GMC Models (Renewed)

Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!

Check This Video For Reference

Reference Sources

Chevrolet U1041, DTCDECODE.