Chevrolet P1682: Ignition 1 Switch Circuit 2
Is your scanner showing Chevrolet P1682?
No worries. We'll show you what it means and how to deal with it.
Chevrolet P1682: Ignition 1 Switch Circuit 2
OVERVIEWWhat Does The Chevrolet P1682 Code Mean?
The powertrain relay is commanded on. Ignition 1 Signal voltage is greater than 5.5 V. DTC P1682 runs continuously when the above conditions are met.
The ECM detects that the voltage level difference is greater than 3 V between the 2 ignition voltage circuits for less than 1 s.
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Nilight 50003R Automotive Set 5-Pin 30/40A 12V SPDT
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
- Chevrolet Volt Hybrid DTC – OBDG01 HYBRID Diagnostics Document, page 180.
- GM, 2013, Service Bullettin – Prior To Any Circuit Testing.
- GM, 2014, Service Bullettin – Intermittent Crank No Start With DTC P1682.
- GM, 2014, Service Bullettin – Service Engine Soon MIL With DTC P1682 – Battery Draw – No Start Due To Non-GM Accessories Aftermarket Product.
- GM, 2014, Service Bullettin – Diagnostic Tip – Service Engine Soon MIL With DTC P1682 – Battery Draw – No Start.
- GM, 2015, Service Bullettin – Intermittent Crank/No Start with DTC P1682 Set.
- GM, 2015, Service Bullettin – Floor Wet Under Carpet/Engine Continues to Run with Key Off/Possible No Crank/No Start/Communication
Loss/Various Electrical Concerns (Seal Seam). - GM, 2015, Service Bullettin – Intermittent Crank No Start With DTC P1682.
