Chevrolet P1153: HO2S Insufficient Switching Bank 2 Sensor 1

Is your scanner showing Chevrolet P1153?
No worries. We'll show you what it means and how to deal with it.

Presented by
Randy Worner

Chevrolet P1153: HO2S Insufficient Switching Bank 2 Sensor 1

OVERVIEW
Severity
:
Medium
DIY Difficulty Level
:
Intermediate
Repair Cost
:
$100-$200
Can I Still Drive?
:
Yes (Short-term only)

What Does The Chevrolet P1153 Code Mean?

The engine coolant temperature (ECT) is greater than 60°C (140°F). The intake air temperature (IAT) is warmer than -40°C (-40°F) The ignition 1 voltage is between 10-18 volts. The fuel level is greater than 10 percent. The engine run time is greater than 160 seconds. The engine speed is between 1,200-3,000 RPM. The barometric (BARO) pressure is greater than 70 kPa. The mass airflow (MAF) is between 20-55 g/s. The fuel system is in Closed Loop. The throttle position (TP) is greater than 5 percent. DTC P0133 runs once per drive cycle when the above conditions are met.

How Can You Fix The Chevrolet P1153 Code?

  • The ECM detects that the HO2S 1 rich-to-lean counts, or the lean-to-rich counts are less than a calibrated value.
  • The DTCs set within 100 seconds when the above condition is met.
  • Check any other DTC on display
  • Using a scan tool, check current data
  • Check rear sensor signal
  • Check exhaust system

Recommended Parts

Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:

Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!

Reference Sources

Tagged :
You know someone would like this

Leave a comment

Your email address will not be published. Required fields are marked *