Audi P1250: Fuel Pressure Regulator Control Circuit Malfunction (Fuel Level too Low)
Is your scanner showing Audi P1250?
No worries. We'll show you what it means and how to deal with it.
Audi P1250: Fuel Pressure Regulator Control Circuit Malfunction (Fuel Level too Low)
OVERVIEWWhat Does The Audi P1250 Code Mean?
KOEO or KOER Self-Test enabled, and the ECM detected a lack of power (VPWR) to the Fuel Pressure Regulator Control (FPRC) solenoid circuit.
What Are The Potential Causes Of The Audi P1250 Code?
- FPRC solenoid valve harness circuits are open or shorted
- FPRC input port or output port vacuum lines are damaged
- FRPC solenoid is damaged
- Fuel level is too low
- ECM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Vacuum Connector Assortment,Automotive Vacuum Tubing Connector
>>> Audi Engine Control Module
>>> Fuel Pressure Regulator Compatible with 1995-2006 AUDI A4 A6 A8
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
- Audi of Ameria, 2014, Technical Service Bulletin.
- Audi of Ameria, 2013, Technical Service Bulletin.
- Audi of Ameria, 2015, Technical Service Bulletin.
- Audi of Ameria, 2012, Technical Service Bulletin.
- Audi of Ameria, 2011, Technical Service Bulletin.
- Audi A4 Avant 95-01 Service Repair Manual, page 45.
