Acura P16BF: Starter Cut Relay STRLY Circuit Malfunction
Is your scanner showing Acura P16BF?
No worries. We'll show you what it means and how to deal with it.
Acura P16BF: Starter Cut Relay STRLY Circuit Malfunction
OVERVIEWWhat Does The Acura P16BF Code Mean?
Condition for setting the DTC:
With ignition switch ON (II) the signal of the on command from the PCM to the starter and the return signal from the starter cut relay do not coincide for at least 5 seconds. The execution time is continuous.
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot.
What Are The Potential Causes Of The Acura P16BF Code?
Below are some potential causes of this DTC:
- Poor connections or loose terminals at starter cut relay 1, starter cut relay 2, and the PCM
- “Short” in the wire between the PCM and starter cut relay 1 or starter cut relay 2
- PCM needs to be updated with the latest software
- Faulty PCM
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> 2 Pack AC Starter Relay
>>> Acura Engine Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Acura P16BF, DTCDECODE.
