Acura P1362: Top Dead Center 1 Sensor No Signal
Is your scanner showing Acura P1362?
No worries. We'll show you what it means and how to deal with it.
Acura P1362: Top Dead Center 1 Sensor No Signal
OVERVIEWWhat Does The Acura P1362 Code Mean?
Engine cranking or running; and the PCM did not receive any signals from the Top Dead Center 1 (TDC1) sensor during the CCM test.
Note: The engine will start and run without the TDC sensor 1 signal.
What Are The Potential Causes Of The Acura P1362 Code?
- TDC1 signal circuit is open or shorted to ground
- TDC1 pickup assembly or its pulse rotor is damaged
- TDC1 is damaged or has failed
- PCM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> OEM Honda Acura Cam TDC Pulse Timing Plate Set K24A K20Z K20A K series RBC RBB
>>> Acura Engine Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
2001 Engine Performance Acura Self-Diagnostics, MDX, 3.2CL & 3.2TL, page 38.
